Снятие ключа Lite-On без пайки и тразистора

[GhostLand 0]

http://xbins.org/nfo.php?file=xboxnfo1690.nfo

 

тут много способов снятие ключа ! Я не силен в англ но это правда? Просто не увидел там чтото про транзисторы и пайку ONLY soft ! Кому лень вот выкладываю :DosFlash and DosFlash32 V1.7 Beta Release Date 23.12.2008

-----------------------------------------------------------

- now supports LiteOn PLDS DG-16D2S 74850C and Geremia's LiteOn Erase and DvdKey method

 

 

The following only applies to the new XBox360 LiteOn drive PLDS DG-16D2S 74850C.

 

 

Geremia's DvdKey method with DosFlash16 with the PC's psu

-----------------------------------------------------------

- disable CD-ROM boot option in BIOS

- connect LiteOn to your PC's power supply unit and SATA port

- power up PC, wait until bootup is finished

- eject tray of the LiteOn and shutdown PC completely

- push the LiteOn tray half in

- power up PC and boot into DOS

- run DosFlash16 in auto mode

- if you read the following:

MTK Vendor Intro failed on port 0x????.

If you choose to resend the command you should turn the drive off and on

after you pressed "Yes".

Do you want to resend the command until the drive responds (Y/N)?

- press 'N' for "No"

- choose the number of your LiteOn ATAPI drive

- enter "LITEON K" to read the drive key

- type the names of inquiry.bin, identify.bin, key.bin and dummy.bin output files

- enter the number of the COM port

- if you read the following:

To receive the drive key use Geremia's DvdKey method like follows:

- Connect your drive with a serial cable to the COM port

- Eject drive tray

- Power off drive

- Push drive tray in until it is half open

- Power on drive

- Press "Yes" if you are ready

Are you ready (Y/N)?

- simply press 'Yes' without doing anything of the above, because we

already did that before

- after this DosFlash16 displays your DVD-Key and saves your key and identify data

- to do the above steps in manual mode use the following command line if your drive

is connected to port 0x0970 and serial cable is on COM port 1

DosFlash LITEON K 0970 1 inquiry.bin identify.bin key.bin dummy.bin

 

 

Geremia's DvdKey method with DosFlash16 and 2nd psu

-----------------------------------------------------

- connect a separate power supply unit to the LiteOn, don't turn it on yet

- power up PC and boot into DOS

- turn on the LiteOn psu

- run DosFlash16 in auto mode

- if you read the following:

MTK Vendor Intro failed on port 0x????.

If you choose to resend the command you should turn the drive off and on

after you pressed "Yes".

Do you want to resend the command until the drive responds (Y/N)?

- press 'N' for "No"

- choose the number of your LiteOn ATAPI drive

- enter "LITEON K" to read the drive key

- type the names of inquiry.bin, identify.bin, key.bin and dummy.bin output files

- enter the number of the COM port

- if you read the following:

To receive the drive key use Geremia's DvdKey method like follows:

- Connect your drive with a serial cable to the COM port

- Eject drive tray

- Power off drive

- Push drive tray in until it is half open

- Power on drive

- Press "Yes" if you are ready

Are you ready (Y/N)?

- do the above and press 'Yes'

- after this DosFlash16 displays your DVD-Key and saves your key and identify data

 

 

Geremia's LiteOn Erase method with DosFlash16 and 2nd psu

-----------------------------------------------------------

- connect a separate power supply unit to the LiteOn, don't turn it on yet

- power up PC and boot into DOS

- turn on the LiteOn psu

- run DosFlash16 in auto mode

- if you read the following:

MTK Vendor Intro failed on port 0x????.

If you choose to resend the command you should turn the drive off and on

after you pressed "Yes".

Do you want to resend the command until the drive responds (Y/N)?

- press 'N' for "No"

- choose the number of your LiteOn ATAPI drive

- Warning!!! Keep in mind that you will need the drive key before you erase the flash,

without the drive key your XBox360 will not work anymore

- enter "LITEON E" to erase the flash

- the first time after the LiteOn Erase the drive needs to be repowered to give

flash chip access, this can be achieved by repowering the drive before another

DosFlash16 start in auto mode or by doing a MTK Vendor Intro Power Brute

- in my tests it did not work to power the drive with the PC's psu, because it will

always respond with busy status

- DosFlash16 can now read, write and erase the flash chip like usual

- to do the above steps in manual mode use the following command line if your drive

is connected to port 0x0970

DosFlash LITEON E 0970

 

 

Geremia's DvdKey method with DosFlash32 with the PC's psu

-----------------------------------------------------------

- disable CD-ROM boot option in BIOS

- connect LiteOn to your PC's power supply unit and SATA port

- power up PC, wait until bootup is finished

- eject tray of the LiteOn and shutdown PC completely

- push the LiteOn tray half in

- power up PC and boot into Windows

- run DosFlash32

- if you read the following:

MTK Vendor Intro failed on port 0x????.

If you choose to resend the command you should turn the drive off and on

after you pressed "Yes".

Do you want to resend the command until the drive responds?

- press 'No'

- choose "LiteOn DvdKey" as flashing task

- choose the COM port number

- press on "LiteOn DvdKey" button

- enter the names of inquiry.bin, identify.bin, key.bin and dummy.bin output files

- if you read the following:

To receive the drive key use Geremia's DvdKey method like follows:

- Connect your drive with a serial cable to the COM port

- Eject drive tray

- Power off drive

- Push drive tray in until it is half open

- Power on drive

- Press "Yes" if you are ready

Are you ready?

- simply press 'Yes' without doing anything of the above, because we

already did that before

- after this DosFlash32 displays your DVD-Key and saves your key and identify data

 

 

Geremia's DvdKey method with DosFlash32 and 2nd psu

-----------------------------------------------------

- connect a separate power supply unit to the LiteOn, don't turn it on yet

- power up PC and boot into Windows

- turn on the LiteOn psu

- run DosFlash32

- if you read the following:

MTK Vendor Intro failed on port 0x????.

If you choose to resend the command you should turn the drive off and on

after you pressed "Yes".

Do you want to resend the command until the drive responds?

- press 'No'

- choose "LiteOn DvdKey" as flashing task

- choose the COM port number

- press on "LiteOn DvdKey" button

- enter the names of inquiry.bin, identify.bin, key.bin and dummy.bin output files

- if you read the following:

To receive the drive key use Geremia's DvdKey method like follows:

- Connect your drive with a serial cable to the COM port

- Eject drive tray

- Power off drive

- Push drive tray in until it is half open

- Power on drive

- Press "Yes" if you are ready

Are you ready?

- do the above and press 'Yes'

- after this DosFlash32 displays your DVD-Key and saves your key and identify data

 

 

Geremia's LiteOn Erase method with DosFlash32 and 2nd psu

-----------------------------------------------------------

- connect a separate power supply unit to the LiteOn, don't turn it on yet

- power up PC and boot into Windows

- turn on the LiteOn psu

- run DosFlash32

- if you read the following:

MTK Vendor Intro failed on port 0x????.

If you choose to resend the command you should turn the drive off and on

after you pressed "Yes".

Do you want to resend the command until the drive responds?

- press 'No'

- the LiteOn flash is not identified

- choose "LiteOn Erase" as flashing task

- Warning!!! Keep in mind that you will need the drive key before you erase the flash,

without the drive key your XBox360 will not work anymore

- press on "LiteOn Erase" button

- the first time after the LiteOn Erase the drive needs to be repowered to give

flash chip access, this can be achieved by repowering the drive before another

DosFlash32 start or by doing a MTK Vendor Intro Power Brute

- in my tests it did not work to power the drive with the PC's psu, because it will

always respond with busy status

- DosFlash32 can now read, write and erase the flash chip like usual

 

 

Respect to Geremia, Modfreakz, Podger, Redline99 and Tiros.

 

Like a wise man said: "0x2E is the MTK Intro of Death"

Kai Schtrom

[logistics 0]

софтверного снятия ключа нет и не придвидится. паяйте.

[Frantic 0]

To receive the drive key use Geremia's DvdKey method like follows:

- Connect your drive with a serial cable to the COM port

- Eject drive tray

- Power off drive

- Push drive tray in until it is half open

- Power on drive

[3JIoY4eJI 0]

Ну может быть )) подарочек от деда мороза )

[3JIoY4eJI 0]

Перевел посмотрел как-то мутно легче тыкнуть и перемкнуть :D

[3JIoY4eJI 0]

Все гуру ящика празднуют вобщем ждем 2 января ))

[logistics 0]

я могу еще раз написать то, что я уже писал - полностью софтверного снятия ключа (по сата, как это было в предыдущих приводах) нет и не придвидится. паяйте свой трансивер или покупайте готовый.

 

3JIoY4eJI

специально для вас существует кнопка правки.

Изменено 31 декабря 2008 пользователем logistics

[Venger 0]

как я понял после перевода сообщения, вышла новая версия программы DosFlash32, которая сама извлекает ключи из привода софт-методом. Правильно я понял?

[logistics 0]

ололо, прочитайте сообщение выше вашего. пожалуйста. спасибо.

[UNIT M.O.G. 0]

- choose "LiteOn DvdKey" as flashing task

- choose the COM port number

- press on "LiteOn DvdKey" button

Этим всё сказано...

http://vkotakte.net84.net/img/Heartagram_small.png

[Frantic 0]

а я выше что вам скопировал?!

[UNIT M.O.G. 0]

а я выше что вам скопировал?!

553170[/snapback]

 

Ну я ещё раз постанул на всякий случай и ещё выделил, а то чёта у всех ещё надежда горит на софтовое снятие ключика.

http://vkotakte.net84.net/img/Heartagram_small.png

[DooM 0]

кто-нибудь пробовал?

[d1n0 0]

фейк по любому

[Гость f1aska]

БРед там тразистор нужен автор убейся,,

[XEO 0]

чистой воды фейк!!! трансивер наше все :moil: