Обновленный FAQ по использованию xbox 360 freeboot

[AlexBest 0]

night_f0x проверь личку

[jevgenysv 0]

Доброго дня. Писал чуть ранее вопрос по поводу сортировки игр в xex menu или freestyle

Там же во фристайле на игре жмеш желтую кнопку и в онтестном меню выбираешь мув, предлагает перенести куда хочешь, в аркады или другие папки, все на много проще чем в сканере папок прописывать.

[Durka 0]

Господа, дайте подскажите пожалуйста стандартные температурные режимы для Slim тринити.

[rtm72 0]

Dishonored вылетает с ошибкой (протрите диск) на одном и том же моменте (загрузка после отравления Корво). Dashlaunch выгружал-та же басня, версия dashlaunch 3.03. Какие варианты по решению проблемы?

[Gman 264]

Ребят, вопрос вот в чем. Если я Юсб винт форматирую боксом для 16гб, то остальное место в ФСД можно использовать? То есть 16гб для сохранок и профиля, остольное для игр через ФСД

[rtm72 0]

Gman, фрибут весь объем видеть должен и в обычном дашборде.

[cosmaty 0]

Gman, фрибут весь объем видеть должен и в обычном дашборде.

И где весь объем?
Gman, форматируй только выбери пользовательские настройки, где нужно выбрать объем, тогда остальное место будешь видеть в ФСД или ХехМеню.
Если сделаешь автоматом, то получишь жесткий объемом 16 или 32 Гига (смотря какой даш).

[rtm72 0]

cosmaty, у меня фалкон с JTAG в родном дашборде 900 с лишним гигабайт показывает.
Если честно, то давно забросил тему со взломами, перестал следить, так что не скажу в чем дело.

[cosmaty 0]

rtm72, USB винт в родном даше?
Странно!

[rtm72 0]

rtm72, USB винт в родном даше?
Странно!

А что странного? На фрибуте вроде ограничений никаких нету на размер винчестера.

[cosmaty 0]

А что странного? На фрибуте вроде ограничений никаких нету на размер винчестера.

Это на внутренний нет, а внешний как обычная флешка.

[Gman 264]

http://s019.radikal.ru/i642/1211/e2/ee879b54ae33t.jpg

И где весь объем?
Gman, форматируй только выбери пользовательские настройки, где нужно выбрать объем, тогда остальное место будешь видеть в ФСД или ХехМеню.
Если сделаешь автоматом, то получишь жесткий объемом 16 или 32 Гига (смотря какой даш).

Благодарю, а то задолбался с родными 256мб, мало уже:D а внутренний особо не нужен, т.к. Все игры на юсб винте.

[nevskogo81 0]

Братки подскажите собираюсь обновится на последний 16даш.Беда в том что сборщик определяет версию как Freeboot(RGH1) а мне ставили фрибут на 14719даш,то есть RGH2.Если выбрать Freeboot(RGH2) или любой другой вариант,кнопка создания хака неактивна.Может я туплю,ниже скрин и лог сборки на Freeboot(RGH1).

 Скрин

 log

==================================
Swizzy's xeBuild GUI version 2.085
Log Started: Saturday 03.11.2012 13:08:35
==================================

*** Some console information ***
CB Version: 9188
Serial number: 044876611108
Console region: PAL/Europe (0x02FE)
DVDKey: 1E88E04A08029092EC89D485A7AE4B84
Console ID: 0365589CD4
MFR-Date: 09-03-11
OSIG String: PLDS DG-16D4S 0225
FCRT.bin Required: True

Using xell-reloaded for Glitch hack
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data directory, this may take a while... Done!
Checking if SMC is Glitch or Retail...
Dumping current SMC... Done!
Checking SMC...
SMC is Glitch patched! it will be used the way it is...

Parameters sent to xeBuild:

-noenter -t glitch -c trinity -d data -f 16197 -b DD88AD0C9ED669E7B56794FB68563EFA -p 9272EB9CBF9936E429E5E40546C8FE25 output.bin

Building nand using xeBuild (this may take a while):

---------------------------------------------------------------
xeBuild v1.05.548
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
output.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch
Xell : power on console with console eject button
Serial : 044876611108
ConsoleId : 009115755014
MoboSerial: 9256434204931118
Mfg Date : 03/09/2011
CPU Key : 9272EB9CBF9936E429E5E40546C8FE25
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 1E88E04A08029092EC89D485A7AE4B84
CF LDV : 5
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------


Moving output to your destination directory... Done!
Cleaning data and temporary directories... Done!


****** The app has now finished! ******

Изменено 3 ноября 2012 пользователем nevskogo81

[night_f0x 0]

запусти dl3.03 и узнай точно какой у тебя тип хака .... Вспоминай точно ли ставили на 14719 ... может ставили на 14699+ обновляли до 719


попробуй сборщик j-runner Изменено 3 ноября 2012 пользователем night_f0x

[syano 0]

Братки подскажите собираюсь обновится на последний 16даш.Беда в том что сборщик определяет версию как Freeboot(RGH1) а мне ставили фрибут на 14719даш,то есть RGH2.Если выбрать Freeboot(RGH2) или любой другой вариант,кнопка создания хака неактивна.Может я туплю,ниже скрин и лог сборки на Freeboot(RGH1).

 Скрин

<a href="http://i068.radikal.ru/1211/70/3df84befdbd2.jpg" target="_blank">http://i068.radikal.ru/1211/70/3df84befdbd2.jpg</a>

 log

==================================
Swizzy's xeBuild GUI version 2.085
Log Started: Saturday 03.11.2012 13:08:35
==================================

*** Some console information ***
CB Version: 9188
Serial number: 044876611108
Console region: PAL/Europe (0x02FE)
DVDKey: 1E88E04A08029092EC89D485A7AE4B84
Console ID: 0365589CD4
MFR-Date: 09-03-11
OSIG String: PLDS DG-16D4S 0225
FCRT.bin Required: True

Using xell-reloaded for Glitch hack
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data directory, this may take a while... Done!
Checking if SMC is Glitch or Retail...
Dumping current SMC... Done!
Checking SMC...
SMC is Glitch patched! it will be used the way it is...

Parameters sent to xeBuild:

-noenter -t glitch -c trinity -d data -f 16197 -b DD88AD0C9ED669E7B56794FB68563EFA -p 9272EB9CBF9936E429E5E40546C8FE25 output.bin

Building nand using xeBuild (this may take a while):

---------------------------------------------------------------
xeBuild v1.05.548
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
output.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch
Xell : power on console with console eject button
Serial : 044876611108
ConsoleId : 009115755014
MoboSerial: 9256434204931118
Mfg Date : 03/09/2011
CPU Key : 9272EB9CBF9936E429E5E40546C8FE25
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 1E88E04A08029092EC89D485A7AE4B84
CF LDV : 5
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------


Moving output to your destination directory... Done!
Cleaning data and temporary directories... Done!


****** The app has now finished! ******

тебе ставили фрибут на 14719даш (слим trinity) - значит у тебя RGH1
кто тебе сказал что у тебя RGH2? Изменено 3 ноября 2012 пользователем syano

[nevskogo81 0]

запусти dl3.03 и узнай точно какой у тебя тип хака .... Вспоминай точно ли ставили на 14719 ... может ставили на 14699+ обновляли до 719
http://s019.radikal.ru/i626/1210/30/789538212a46.jpg

попробуй сборщик j-runner

Нет на 14719 обновлялся еще сам до фрибута,сейчас глянул в дашлаунче стоит глитч2.Собрал j-runner последним,гляньте кто-нибудь лог

 log

-------------------------------------------------------------
xeBuild v1.05.548
---------------------------------------------------------------
building glitch2 image
<enter> key on completion suppressed
data directory overridden from command line to '.\xeBuild\16197\'
per build directory overridden from command line to 'xeBuild\data'
file name overridden from command line to 'C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin'

------ parsing user ini at '.\xeBuild\data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x18c bytes in memory
loading cpukey.txt from .\xeBuild\data\cpukey.txt
CPU Key set to: 0x9272EB9CBF9936E429E5E40546C8FE25
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to: 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to: 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
Using patchsmc option (ini file)

------ parsing ini at '.\xeBuild\16197\_glitch2.ini' ------
ini version 16197

ini: label [trinitybl] found
found (1) 'cba_9188.bin' crc: 0x5a76752d
found (2) 'cbb_9188.bin' crc: 0xfebb1074
found (3) 'cd_9452.bin' crc: 0x455fa02c
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_16197.bin' crc: 0x061f2aee
found (6) 'cg_16197.bin' crc: 0x794ba864
ini dictates dual CB for this model

ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x9cdaf9d8
found (2) 'bootanim.xex' crc: 0xf40b8ef7
found (3) 'createprofile.xex' crc: 0x0ab6ac18
found (4) 'dash.xex' crc: 0x1344afb9
found (5) 'deviceselector.xex' crc: 0x96e11122
found (6) 'gamerprofile.xex' crc: 0xeff932b4
found (7) 'hud.xex' crc: 0x16151192
found (8) 'huduiskin.xex' crc: 0xe4160238
found (9) 'mfgbootlauncher.xex' crc: 0xebfa58f5
found (10) 'minimediaplayer.xex' crc: 0x1b4c3911
found (11) 'nomni.xexp' crc: 0xc5243371
found (12) 'nomnifwk.xexp' crc: 0xe165236b
found (13) 'nomnifwm.xexp' crc: 0xff3a716f
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x54da7896
found (16) 'updater.xex' crc: 0xb49a8ecd
found (17) 'vk.xex' crc: 0x8964dc71
found (18) 'xam.xex' crc: 0xa5576351
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0x24a63542
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0x44a99665

ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------

output name overridden to: C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin


------ Checking .\xeBuild\data\nanddump.bin ------
.\xeBuild\data\nanddump.bin file size: 0x1080000
nanddump header checks passed OK!
Loading NAND dump (0x1080000 bytes)...done!
Detecting NAND controller type from dump data...
NAND dump is from a small block machine
NAND dump uses big block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x05 Pairing: 0x779e07
setting LDV from image to 5
setting pairing data from image to 0x779e07
MobileB.dat found at page 0x7660, size 2048 (0x800) bytes
MobileC.dat found at page 0x73a0, size 512 (0x200) bytes
MobileD.dat found at page 0x7560, size 2048 (0x800) bytes
MobileE.dat found at page 0x7580, size 2048 (0x800) bytes
Statistics.settings found at page 0x7bc0, size 4096 (0x1000) bytes
seeking FSRoot...fsroot found at page 0x7aa0 raw offset 0xfcea00
seeking security files...
crl.bin found in sector 0x3a3 size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x3a4 size 0xad30...verified! Will use if external file not found.
extended.bin found in sector 0x3b0 size 0x4000...verified! Will use if external file not found.
fcrt.bin found in sector 0x3a8 size 0x4000...verified! Will use if external file not found.
secdata.bin found in sector 0x3b2 size 0x400...verified! Will use if external file not found.
done!
Writing initial header to flash image

------ loading system update container ------
.\xeBuild\16197\su20076000_00000000 found, loading...done!
Read 0xb2f000 bytes to memory
checking container integrity...
header seems valid, version 2.0.16197.00
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x79a50 bytes)
decrypting SUPD\xboxupd.bin\CF_16197.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_16197.bin (0x754ec bytes)...done!

------ Loading bootloaders and required security files ------
reading .\xeBuild\data\smc.bin failed, using smc.bin from nand dump
reset smc load address to 0x1000 size 0x3000
reading .\xeBuild\data\kv.bin failed, using kv.bin from nand dump
reading .\common\cba_9188.bin (0x1ac0 bytes)
reading .\common\cbb_9188.bin (0x7800 bytes)
reading .\common\cd_9452.bin (0x4f20 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
reading .\xeBuild\data\xell-gggggg.bin (0x40000 bytes)
extracted SUPD\xboxupd.bin\CF_16197.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_16197.bin (0x754ec bytes)
reading .\xeBuild\16197\bin\patches_g2trinity.bin (0x864 bytes)
reading .\xeBuild\data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu: 82шC Gpu: 78шC Edram: 76шC
Max temps : Cpu: 89шC Gpu: 82шC Edram: 82шC
Cpu Fan : (auto)
Gpu Fan : (auto)
MAC Address : 7c:ed:8d:55:89:cd
AVRegion : 0x00000300 (PAL50)
GameRegion : 0x02fe (PAL/EU)
DVDRegion : 5
resetKey : LYRR
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
done!
patch slot offset reset to: 0xb0000

------ Patching BLs and modifying patches ------
Patching header for xell power reason
Patching BLs...Done!

------ Encrypting and finalizing bootloaders ------
encoding smc.bin size 0x3000
SMC checksum: 87e726b7
unknown SMC found, type: Trinity v5.1(3.01)
glitch hack found in smc.bin!
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
encoding cba_9188.bin size 0x1ac0
encoding cbb_9188.bin size 0x7800
CB 9188 seq 0x03010001 type: 0x03 cseq: 0x01 allow: 0x0001
expected fuses:
fuseset 00: C0FFFFFFFFFFFFFF
fuseset 01: 0F0F0F0F0F0FF0F0
fuseset 02: F000000000000000 (sequence)
fuseset 02: F000000000000000 (allow cseq 1)
**dual CB flag detected!**
encoding cd_9452.bin size 0x5290
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x40000
encoding cf_16197.bin size 0x4560
encoding cg_16197.bin size 0x754f0
encoding patches_g2trinity.bin size 0x498
done!

------ Adding bootloaders to flash image ------
adding smc.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_9188.bin at raw offset 0x00008000 len 0x1ac0 (end 0x9ac0)
adding cbb_9188.bin at raw offset 0x00009ac0 len 0x7800 (end 0x112c0)
adding cd_9452.bin at raw offset 0x000112c0 len 0x5290 (end 0x16550)
adding ce_1888.bin at raw offset 0x00016550 len 0x56070 (end 0x6c5c0)
adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)
adding cf_16197.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)
adding cg_16197.bin at raw offset 0x000b4560 len 0x754f0 (end 0xc0000, rest in fs)
adding patches_g2trinity.bin at raw offset 0x000c0010 len 0x498 (end 0xc04a8)
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
at raw offset 0xd0000 len 0x00069a50 (end: 0x00139a50)...done!

------ adding 25 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x9cdaf9d8 ini: 0x9cdaf9d8)
adding as aac.xexp1 at raw offset 0x139a50 len 0x00014000 (end 0x0014da50)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0xf40b8ef7 ini: 0xf40b8ef7)
adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0x0ab6ac18 ini: 0x0ab6ac18)
adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000)
extracted SUPD\dash.xex (0x59a000 bytes) (crc32: 0x1344afb9 ini: 0x1344afb9)
adding as dash.xex at raw offset 0x1c0000 len 0x0059a000 (end 0x0075a000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32: 0x96e11122 ini: 0x96e11122)
adding as deviceselector.xex at raw offset 0x75a000 len 0x0000a000 (end 0x00764000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0xeff932b4 ini: 0xeff932b4)
adding as gamerprofile.xex at raw offset 0x766000 len 0x0001b000 (end 0x00781000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0x16151192 ini: 0x16151192)
adding as hud.xex at raw offset 0x783000 len 0x0001d000 (end 0x007a0000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0xe4160238 ini: 0xe4160238)
adding as huduiskin.xex at raw offset 0x7a1000 len 0x00014000 (end 0x007b5000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xebfa58f5 ini: 0xebfa58f5)
adding as mfgbootlauncher.xex at raw offset 0x7b8000 len 0x00008000 (end 0x007c0000)
extracted SUPD\minimediaplayer.xex (0xb000 bytes) (crc32: 0x1b4c3911 ini: 0x1b4c3911)
adding as minimediaplayer.xex at raw offset 0x7c0000 len 0x0000b000 (end 0x007cb000)
extracted SUPD\nomni.xexp (0xe000 bytes) (crc32: 0xc5243371 ini: 0xc5243371)
adding as nomni.xexp1 at raw offset 0x7cb000 len 0x0000e000 (end 0x007d9000)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0xe165236b ini: 0xe165236b)
adding as nomnifwk.xexp1 at raw offset 0x7da000 len 0x00002000 (end 0x007dc000)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0xff3a716f ini: 0xff3a716f)
adding as nomnifwm.xexp1 at raw offset 0x7de000 len 0x00005000 (end 0x007e3000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)
adding as SegoeXbox-Light.xtt at raw offset 0x7e5000 len 0x00006000 (end 0x007eb000)
extracted SUPD\signin.xex (0x16000 bytes) (crc32: 0x54da7896 ini: 0x54da7896)
adding as signin.xex at raw offset 0x7ee000 len 0x00016000 (end 0x00804000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0xb49a8ecd ini: 0xb49a8ecd)
adding as updater.xex at raw offset 0x806000 len 0x00007000 (end 0x0080d000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0x8964dc71 ini: 0x8964dc71)
adding as vk.xex at raw offset 0x80f000 len 0x0000b000 (end 0x0081a000)
extracted SUPD\xam.xex (0x24f000 bytes) (crc32: 0xa5576351 ini: 0xa5576351)
adding as xam.xex at raw offset 0x81b000 len 0x0024f000 (end 0x00a6a000)
reading .\xeBuild\16197\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
adding as xenonclatin.xtt at raw offset 0xa6b000 len 0x0011b000 (end 0x00b86000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
adding as xenonclatin.xttp1 at raw offset 0xb87000 len 0x00018000 (end 0x00b9f000)
reading .\xeBuild\16197\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
adding as xenonjklatin.xtt at raw offset 0xba0000 len 0x001a8000 (end 0x00d48000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)
adding as xenonjklatin.xttp1 at raw offset 0xd48000 len 0x00007000 (end 0x00d4f000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0x24a63542 ini: 0x24a63542)
adding as ximecore.xex at raw offset 0xd4f000 len 0x00017000 (end 0x00d66000)
reading .\xeBuild\16197\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
adding as ximedic.xex at raw offset 0xd67000 len 0x00090000 (end 0x00df7000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0x44a99665 ini: 0x44a99665)
adding as ximedic.xexp1 at raw offset 0xdf8000 len 0x00002800 (end 0x00dfa800)

------ adding 5 security files ------
<- Processing crl.bin ->
reading .\xeBuild\data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
adding as crl.bin at raw offset 0xdfc000 len 0x00000a00 (end 0x00dfca00)

<- Processing dae.bin ->
reading .\xeBuild\data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
adding as dae.bin at raw offset 0xe00000 len 0x0000ad30 (end 0x00e0ad30)

<- Processing extended.bin ->
reading .\xeBuild\data\extended.bin (0x4000 bytes)
adding as extended.bin at raw offset 0xe0c000 len 0x00004000 (end 0x00e10000)

<- Processing fcrt.bin ->
could not read fcrt.bin, using data from nanddump.bin...
adding as fcrt.bin at raw offset 0xe10000 len 0x00004000 (end 0x00e14000)

<- Processing secdata.bin ->
reading .\xeBuild\data\secdata.bin (0x400 bytes)
adding as secdata.bin at raw offset 0xe14000 len 0x00000400 (end 0x00e14400)

------ checking for Mobile*.dat ------
MobileB.dat found, adding from nanddump.bin
adding MobileB.dat as type 0x31 at raw offset 0xe18000 len 0x800 (end 0xe18800)
MobileC.dat found, adding from nanddump.bin
adding MobileC.dat as type 0x32 at raw offset 0xe1c000 len 0x200 (end 0xe1c200)
MobileD.dat found, adding from nanddump.bin
adding MobileD.dat as type 0x33 at raw offset 0xe20000 len 0x800 (end 0xe20800)
MobileE.dat found, adding from nanddump.bin
adding MobileE.dat as type 0x34 at raw offset 0xe24000 len 0x800 (end 0xe24800)
Statistics.settings found, adding from nanddump.bin
adding Statistics.settings at raw offset 0xf78000 len 0x1000 (end 0xf79000)

------ adding smc_config.bin ------
adding smc config to offset 0x00f7c000, len 0x400

------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0xe28000 len 0x4000 (end 0xe2c000)...done!
fixing up big block controller on small block NAND LBA numbers...done!
calculating ECD bytes and assembling raw image...done!
writing file 'C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin' to disk...done!
C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin written OK

---------------------------------------------------------------
C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 044876611108
ConsoleId : 009115755014
MoboSerial: 9256434204931118
Mfg Date : 03/09/2011
CPU Key : 9272EB9CBF9936E429E5E40546C8FE25
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 1E88E04A08029092EC89D485A7AE4B84
CF LDV : 5
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

тебе ставили фрибут на 14719даш (слим trinity) - значит у тебя RGH1
кто тебе сказал что у тебя RGH2?

После таких советчиков консоли отправляются к мастерам,не знаешь лучше промолчи, RGH1 включительно до 14699,выше все глитч2.Сообственно именно это у меня на писанно в дашлаунче Glitch2

[Dennie 0]

Вроде по инструкции поставил дашланч. И теперь почему то он запускается при каждой загрузке, вместо фристайла. Что я сделал не так?

[DobXP 0]

Ребята почему хбокс виснуть может без каких-то видимых причин просто виснет и все ? Стоит фрибут , играю с внешнего ХДД . Причем не от перегрева , может просто в любой момент это сделать .

[syano 0]

Нет на 14719 обновлялся еще сам до фрибута,сейчас глянул в дашлаунче стоит глитч2.Собрал j-runner последним,гляньте кто-нибудь лог

 log

-------------------------------------------------------------
xeBuild v1.05.548
---------------------------------------------------------------
building glitch2 image
<enter> key on completion suppressed
data directory overridden from command line to '.\xeBuild\16197\'
per build directory overridden from command line to 'xeBuild\data'
file name overridden from command line to 'C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin'

------ parsing user ini at '.\xeBuild\data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x18c bytes in memory
loading cpukey.txt from .\xeBuild\data\cpukey.txt
CPU Key set to: 0x9272EB9CBF9936E429E5E40546C8FE25
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to: 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to: 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
Using patchsmc option (ini file)

------ parsing ini at '.\xeBuild\16197\_glitch2.ini' ------
ini version 16197

ini: label [trinitybl] found
found (1) 'cba_9188.bin' crc: 0x5a76752d
found (2) 'cbb_9188.bin' crc: 0xfebb1074
found (3) 'cd_9452.bin' crc: 0x455fa02c
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_16197.bin' crc: 0x061f2aee
found (6) 'cg_16197.bin' crc: 0x794ba864
ini dictates dual CB for this model

ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x9cdaf9d8
found (2) 'bootanim.xex' crc: 0xf40b8ef7
found (3) 'createprofile.xex' crc: 0x0ab6ac18
found (4) 'dash.xex' crc: 0x1344afb9
found (5) 'deviceselector.xex' crc: 0x96e11122
found (6) 'gamerprofile.xex' crc: 0xeff932b4
found (7) 'hud.xex' crc: 0x16151192
found (8) 'huduiskin.xex' crc: 0xe4160238
found (9) 'mfgbootlauncher.xex' crc: 0xebfa58f5
found (10) 'minimediaplayer.xex' crc: 0x1b4c3911
found (11) 'nomni.xexp' crc: 0xc5243371
found (12) 'nomnifwk.xexp' crc: 0xe165236b
found (13) 'nomnifwm.xexp' crc: 0xff3a716f
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x54da7896
found (16) 'updater.xex' crc: 0xb49a8ecd
found (17) 'vk.xex' crc: 0x8964dc71
found (18) 'xam.xex' crc: 0xa5576351
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0x24a63542
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0x44a99665

ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------

output name overridden to: C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin


------ Checking .\xeBuild\data\nanddump.bin ------
.\xeBuild\data\nanddump.bin file size: 0x1080000
nanddump header checks passed OK!
Loading NAND dump (0x1080000 bytes)...done!
Detecting NAND controller type from dump data...
NAND dump is from a small block machine
NAND dump uses big block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x05 Pairing: 0x779e07
setting LDV from image to 5
setting pairing data from image to 0x779e07
MobileB.dat found at page 0x7660, size 2048 (0x800) bytes
MobileC.dat found at page 0x73a0, size 512 (0x200) bytes
MobileD.dat found at page 0x7560, size 2048 (0x800) bytes
MobileE.dat found at page 0x7580, size 2048 (0x800) bytes
Statistics.settings found at page 0x7bc0, size 4096 (0x1000) bytes
seeking FSRoot...fsroot found at page 0x7aa0 raw offset 0xfcea00
seeking security files...
crl.bin found in sector 0x3a3 size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x3a4 size 0xad30...verified! Will use if external file not found.
extended.bin found in sector 0x3b0 size 0x4000...verified! Will use if external file not found.
fcrt.bin found in sector 0x3a8 size 0x4000...verified! Will use if external file not found.
secdata.bin found in sector 0x3b2 size 0x400...verified! Will use if external file not found.
done!
Writing initial header to flash image

------ loading system update container ------
.\xeBuild\16197\su20076000_00000000 found, loading...done!
Read 0xb2f000 bytes to memory
checking container integrity...
header seems valid, version 2.0.16197.00
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x79a50 bytes)
decrypting SUPD\xboxupd.bin\CF_16197.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_16197.bin (0x754ec bytes)...done!

------ Loading bootloaders and required security files ------
reading .\xeBuild\data\smc.bin failed, using smc.bin from nand dump
reset smc load address to 0x1000 size 0x3000
reading .\xeBuild\data\kv.bin failed, using kv.bin from nand dump
reading .\common\cba_9188.bin (0x1ac0 bytes)
reading .\common\cbb_9188.bin (0x7800 bytes)
reading .\common\cd_9452.bin (0x4f20 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
reading .\xeBuild\data\xell-gggggg.bin (0x40000 bytes)
extracted SUPD\xboxupd.bin\CF_16197.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_16197.bin (0x754ec bytes)
reading .\xeBuild\16197\bin\patches_g2trinity.bin (0x864 bytes)
reading .\xeBuild\data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu: 82шC Gpu: 78шC Edram: 76шC
Max temps : Cpu: 89шC Gpu: 82шC Edram: 82шC
Cpu Fan : (auto)
Gpu Fan : (auto)
MAC Address : 7c:ed:8d:55:89:cd
AVRegion : 0x00000300 (PAL50)
GameRegion : 0x02fe (PAL/EU)
DVDRegion : 5
resetKey : LYRR
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
done!
patch slot offset reset to: 0xb0000

------ Patching BLs and modifying patches ------
Patching header for xell power reason
Patching BLs...Done!

------ Encrypting and finalizing bootloaders ------
encoding smc.bin size 0x3000
SMC checksum: 87e726b7
unknown SMC found, type: Trinity v5.1(3.01)
glitch hack found in smc.bin!
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
encoding cba_9188.bin size 0x1ac0
encoding cbb_9188.bin size 0x7800
CB 9188 seq 0x03010001 type: 0x03 cseq: 0x01 allow: 0x0001
expected fuses:
fuseset 00: C0FFFFFFFFFFFFFF
fuseset 01: 0F0F0F0F0F0FF0F0
fuseset 02: F000000000000000 (sequence)
fuseset 02: F000000000000000 (allow cseq 1)
**dual CB flag detected!**
encoding cd_9452.bin size 0x5290
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x40000
encoding cf_16197.bin size 0x4560
encoding cg_16197.bin size 0x754f0
encoding patches_g2trinity.bin size 0x498
done!

------ Adding bootloaders to flash image ------
adding smc.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_9188.bin at raw offset 0x00008000 len 0x1ac0 (end 0x9ac0)
adding cbb_9188.bin at raw offset 0x00009ac0 len 0x7800 (end 0x112c0)
adding cd_9452.bin at raw offset 0x000112c0 len 0x5290 (end 0x16550)
adding ce_1888.bin at raw offset 0x00016550 len 0x56070 (end 0x6c5c0)
adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)
adding cf_16197.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)
adding cg_16197.bin at raw offset 0x000b4560 len 0x754f0 (end 0xc0000, rest in fs)
adding patches_g2trinity.bin at raw offset 0x000c0010 len 0x498 (end 0xc04a8)
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
at raw offset 0xd0000 len 0x00069a50 (end: 0x00139a50)...done!

------ adding 25 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x9cdaf9d8 ini: 0x9cdaf9d8)
adding as aac.xexp1 at raw offset 0x139a50 len 0x00014000 (end 0x0014da50)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0xf40b8ef7 ini: 0xf40b8ef7)
adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0x0ab6ac18 ini: 0x0ab6ac18)
adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000)
extracted SUPD\dash.xex (0x59a000 bytes) (crc32: 0x1344afb9 ini: 0x1344afb9)
adding as dash.xex at raw offset 0x1c0000 len 0x0059a000 (end 0x0075a000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32: 0x96e11122 ini: 0x96e11122)
adding as deviceselector.xex at raw offset 0x75a000 len 0x0000a000 (end 0x00764000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0xeff932b4 ini: 0xeff932b4)
adding as gamerprofile.xex at raw offset 0x766000 len 0x0001b000 (end 0x00781000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0x16151192 ini: 0x16151192)
adding as hud.xex at raw offset 0x783000 len 0x0001d000 (end 0x007a0000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0xe4160238 ini: 0xe4160238)
adding as huduiskin.xex at raw offset 0x7a1000 len 0x00014000 (end 0x007b5000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xebfa58f5 ini: 0xebfa58f5)
adding as mfgbootlauncher.xex at raw offset 0x7b8000 len 0x00008000 (end 0x007c0000)
extracted SUPD\minimediaplayer.xex (0xb000 bytes) (crc32: 0x1b4c3911 ini: 0x1b4c3911)
adding as minimediaplayer.xex at raw offset 0x7c0000 len 0x0000b000 (end 0x007cb000)
extracted SUPD\nomni.xexp (0xe000 bytes) (crc32: 0xc5243371 ini: 0xc5243371)
adding as nomni.xexp1 at raw offset 0x7cb000 len 0x0000e000 (end 0x007d9000)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0xe165236b ini: 0xe165236b)
adding as nomnifwk.xexp1 at raw offset 0x7da000 len 0x00002000 (end 0x007dc000)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0xff3a716f ini: 0xff3a716f)
adding as nomnifwm.xexp1 at raw offset 0x7de000 len 0x00005000 (end 0x007e3000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)
adding as SegoeXbox-Light.xtt at raw offset 0x7e5000 len 0x00006000 (end 0x007eb000)
extracted SUPD\signin.xex (0x16000 bytes) (crc32: 0x54da7896 ini: 0x54da7896)
adding as signin.xex at raw offset 0x7ee000 len 0x00016000 (end 0x00804000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0xb49a8ecd ini: 0xb49a8ecd)
adding as updater.xex at raw offset 0x806000 len 0x00007000 (end 0x0080d000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0x8964dc71 ini: 0x8964dc71)
adding as vk.xex at raw offset 0x80f000 len 0x0000b000 (end 0x0081a000)
extracted SUPD\xam.xex (0x24f000 bytes) (crc32: 0xa5576351 ini: 0xa5576351)
adding as xam.xex at raw offset 0x81b000 len 0x0024f000 (end 0x00a6a000)
reading .\xeBuild\16197\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
adding as xenonclatin.xtt at raw offset 0xa6b000 len 0x0011b000 (end 0x00b86000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
adding as xenonclatin.xttp1 at raw offset 0xb87000 len 0x00018000 (end 0x00b9f000)
reading .\xeBuild\16197\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
adding as xenonjklatin.xtt at raw offset 0xba0000 len 0x001a8000 (end 0x00d48000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)
adding as xenonjklatin.xttp1 at raw offset 0xd48000 len 0x00007000 (end 0x00d4f000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0x24a63542 ini: 0x24a63542)
adding as ximecore.xex at raw offset 0xd4f000 len 0x00017000 (end 0x00d66000)
reading .\xeBuild\16197\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
adding as ximedic.xex at raw offset 0xd67000 len 0x00090000 (end 0x00df7000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0x44a99665 ini: 0x44a99665)
adding as ximedic.xexp1 at raw offset 0xdf8000 len 0x00002800 (end 0x00dfa800)

------ adding 5 security files ------
<- Processing crl.bin ->
reading .\xeBuild\data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
adding as crl.bin at raw offset 0xdfc000 len 0x00000a00 (end 0x00dfca00)

<- Processing dae.bin ->
reading .\xeBuild\data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
adding as dae.bin at raw offset 0xe00000 len 0x0000ad30 (end 0x00e0ad30)

<- Processing extended.bin ->
reading .\xeBuild\data\extended.bin (0x4000 bytes)
adding as extended.bin at raw offset 0xe0c000 len 0x00004000 (end 0x00e10000)

<- Processing fcrt.bin ->
could not read fcrt.bin, using data from nanddump.bin...
adding as fcrt.bin at raw offset 0xe10000 len 0x00004000 (end 0x00e14000)

<- Processing secdata.bin ->
reading .\xeBuild\data\secdata.bin (0x400 bytes)
adding as secdata.bin at raw offset 0xe14000 len 0x00000400 (end 0x00e14400)

------ checking for Mobile*.dat ------
MobileB.dat found, adding from nanddump.bin
adding MobileB.dat as type 0x31 at raw offset 0xe18000 len 0x800 (end 0xe18800)
MobileC.dat found, adding from nanddump.bin
adding MobileC.dat as type 0x32 at raw offset 0xe1c000 len 0x200 (end 0xe1c200)
MobileD.dat found, adding from nanddump.bin
adding MobileD.dat as type 0x33 at raw offset 0xe20000 len 0x800 (end 0xe20800)
MobileE.dat found, adding from nanddump.bin
adding MobileE.dat as type 0x34 at raw offset 0xe24000 len 0x800 (end 0xe24800)
Statistics.settings found, adding from nanddump.bin
adding Statistics.settings at raw offset 0xf78000 len 0x1000 (end 0xf79000)

------ adding smc_config.bin ------
adding smc config to offset 0x00f7c000, len 0x400

------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0xe28000 len 0x4000 (end 0xe2c000)...done!
fixing up big block controller on small block NAND LBA numbers...done!
calculating ECD bytes and assembling raw image...done!
writing file 'C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin' to disk...done!
C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin written OK

---------------------------------------------------------------
C:\Users\ALEXANDR\Downloads\J-Runner v02 Beta (283) Core Pack\J-Runner v02 Beta (283) Core Pack\044876611108\updflash.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 044876611108
ConsoleId : 009115755014
MoboSerial: 9256434204931118
Mfg Date : 03/09/2011
CPU Key : 9272EB9CBF9936E429E5E40546C8FE25
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 1E88E04A08029092EC89D485A7AE4B84
CF LDV : 5
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

После таких советчиков консоли отправляются к мастерам,не знаешь лучше промолчи, RGH1 включительно до 14699,выше все глитч2.Сообственно именно это у меня на писанно в дашлаунче Glitch2

На trinity включительно даша 14719 ставится RGH1 и не надо тут на меня бочку гнать
RGH2 косается фаток и coron

[nevskogo81 0]

На trinity включительно даша 14719 ставится RGH1 и не надо тут на меня бочку гнать
RGH2 косается фаток и coron

Ну что тут скажешь помочь нечем,небуду вас разубеждать, все кому надо знают, что RGH2 начинается с 14717 включительно.
Почитай что автор этой темы пиши,раздел Как мне обновить сборку своего Фрибут\Jtag\RGH на актуальную версию ?

JTAG - традиционный jtag hack (smc) на ядре 2,0 7ххх
RGH - Xbox Slim с любым ядром и Xbox Fat с ядром = 14699 или ниже
RGH 2 - для Xbox Fat и Slim с ядром выше 14699 ( 14717, 14719 )

Поставил 16даш,все работает,всем спасибо. Изменено 3 ноября 2012 пользователем nevskogo81

[Hunk 0]

Как узнать свой CPU key?

[syano 0]

Ну что тут скажешь помочь нечем,небуду вас разубеждать, все кому надо знают, что RGH2 начинается с 14717 включительно.
Почитай что автор этой темы пиши,раздел Как мне обновить сборку своего Фрибут\Jtag\RGH на актуальную версию ?


Поставил 16даш,все работает,всем спасибо.

я давно это уже не читаю, я ставлю RGH1 на trinity 14719

Как узнать свой CPU key?

задай вопрос по коректней

[Hunk 0]

Как узнать ключ процессора для обновления дашборда? В Dash Launch 3.03 я этой опции не нашёл.

[Andrey_Dnepr 0]

Запускаем Dashlaunch 3.03, нажатием кнопки RB находим пункт Show advanced system information (если оболочка русского дашланча значит, такого пункта не будет, под кнопкой ЗАПУСТИТЬ ищем пункт и запускаем его) – после этого переписываем свой CPU Key!

[Hunk 0]

Спасибо.